Video Image Grabbings(container holding grabbed image (scaled)t
change video settingsu
2 - start previewy
save settingsz
restore settings{
4- stop
I2in this rectangle the video preview will be shown.
J*1- connect a video input to your computer.
After clicking this button you should get the live video image preview on the left. If not, you may need to change the video settings (press the button below).
3 - grab image
M]Clicking this button will create a new record and get the image in the container field below.
N This will stop the preview mode.
Read MeB
QuitX
Show Image Grabbing`
go to: www.troi.comz
Function Overview{
Read Me}
Order Via Web site
Student registration example
Trade show example
HAFDon
t forget to check out the
Grabber User Guide.pdf
(version 1.2).
Rotate and Cropping
(MacOS only)
1998-1999 Troi Automatisering
_GrabberSettingsC
PAL 1/2 size
FMP 4.0 Bug warningB
Troi Grabber Plug-in
Troi Grabber Plug-in is copyright 1998-1999 of Troi Automatisering. All rights reserved (04-Nov-1999).
Thank you for your interest in Troi Grabber Plug-in. This plug-in adds Video Image Grabbing functions to FileMaker Pro 4.0 (or higher). With it you can take a picture from a video camera and put it into a container field.
IMPORTANT On Mac you need QuickTime (version 2.5 or higher) installed and a video input source that is compatible with Quicktime. Examples of th
ese inputs are the built in video-in port on AV Macs and the (color) Quickcam from Connectix. On Windows you need an input device with a TWAIN driver.
INSTALLATION INSTRUCTIONS
INSTALLING A (TROI) PLUG-IN FOR THE FIRST TIME.
-For Macintosh: put the file "Troi Grabber Plug-in" from the folder "Macintosh Plug-in" into the
"FileMaker Extensions" folder in the FileMaker Pro folder. If you have installed previous
versions of this plug-in, you must remove them.
-For Windows: p
ut the file "grabber.fmx" from the directory "Windows Plug-in" into the "SYSTEM"
subdirectory in the FileMaker Pro directory. If you have installed previous versions of this
plug-in, you must remove them.
You may want to install other plug-ins before proceeding. Then (re)start FileMaker Pro. You can check which plug-ins you have loaded by going to the plug-in preferences: Choose
Preferences from the Edit menu, and then choose Plug-ins.
You can now open the file "GrabExpl.fp3" t
o see how to use the plug-in's functions. There is also a Function overview in this file.
Warning:
There is a problem in FileMaker 4.0v1. Please make sure that all plug-ins that are in the folder "FileMaker Extensions" are enabled in the preferences (Under Edit/ Preferences/ Application/ Plug-ins). Make sure all plug-ins have a cross before their name. Remove plug-ins you don't use from the "FileMaker Extensions" folder. Windows users find the plug-ins in the "SYSTEM" subdirectory in th
e FileMaker Pro 4.0 directory. NB: This bug is fixed in version 5, 4.1 and in 4.0v2.
Here at Troi Automatisering we feel so strongly about our software that we offer a 30 day money back guarantee on all our products. If want more information about the products we recommend that you visit our Web site.
If you would like information about our other products, just ask us. For the quickest way to learn more
about Troi's products, visit our web site listed below.
You can visit the Troi web site at: <http://www.troi.com/> for additional information.
FTP: <ftp://ftp.troi.com/>
Internet Mail: info@troi.com
Troi may also be reached by postal mail:
Troi Automatisering
Vuurlaan 18
2408 NB Alphen a/d Rijn
The Netherlands
Tel: +31-172-426606
Fax: +31-172-470539
Where can I get the latest version and more information?
The latest versions of our software are available for downloading a
t our web site: <http://www.troi.com/>
Here you will also find late breaking information, company information, FileMaker tips and more. Our software will also be posted (with
a week delay) to info-mac (and its mirrors). Go to: <http://www.pht.com/info-mac> or <http://hyperarchive.lcs.mit.edu/HyperArchive.html>.
System Requirements
This software should be able to run on any machine that is able to run FileMaker Pro 4.0. Of course you need a copy of FileMaker Pro, this should be a version
4.0v1 or later. This may be the US version or any other localization.
on Mac you also need :
- a video camera (CamCorder)
- QuickTime (version 2.5 or higher)
- a QuickTime compatible video input port
on Windows you also need :
- a TWAIN compatible input source, like a video camera (CamCorder)
means that you are free and invited to test the plug-in 30 days before you pay. You may also make copies of the original and complete package (including this Read Me file) and distribute it to customers, friends etc. However, you may not distribute a modified or licensed version.
Use Troi Grabber Plug-in at your own risk:
Although Troi Grabber Plug-in was tested carefully, we can not be responsible for any damages resulting from using this software. Also please try it out on a test databa
se. Your system may be using an extension (unknown to us) that interferes with the proper functioning of Troi Grabber Plug-in.
We like to hear feedback on the benefits and shortcomings of the plug-in. Please include the platform and operating system in your suggestions and comments.
What are the costs?
Troi Grabber plug-in has the following pricing:
Graphic
plug-in
1 or more single user licenses (per use
r): $ 79
Site license: $ 400
World-wide license: $ 600
Developer distribution license: $ 199
A Site License covers all locations for your organization within a 160 kilometer radius of your site (100 miles). One big advantage of a Site License is that you do not need to keep track of how many people at your site are using the software. A World-Wide License covers all locations for your organization on the planet earth.
Troi Plug-ins are available for Macintosh and Windows. When ordering please indicate for which platform you are ordering.
Special licenses for developers of FileMaker Pro solutions are available. Also sub-licensing is possible. Please contact Troi for information about this. Plug-ins do not work with the FileMaker Pro SDK version 3.0. This plug-in works with the 4.0 Developer edition version.
How to pay?
Paying for a license is easy. There are 4 ways to pay:
1) Pay via Kagi with the en
closed Register program
2) Pay via Kagi Online at <http://order.kagi.com/?5i>
3) Pay via Waves in Motion online at <http://www.wmotion.com/>
4) Pay Troi Automatisering directly (only for users in the Netherlands)
1) Pay Kagi with the enclosed Register program
Kagi is a trustworthy payment service which handles payment for a lot of users and software authors . As of end of Nov 1997 Kagi already processed 338505 payments.
To pay open the Register program that accompanies Troi Graphic Plug-i
n. Enter your name, your email address, and the number of single user licenses you desire for each program you wish to purchase (or Site or World-Wide licenses). Save or Copy or Print the data from the Register program and send the data and payment to Kagi. More specifics on the Register program to follow. Kagi handles my payment processing.
If paying with Credit Card or First Virtual, you can email or fax the data to Kagi. Their email address is sales@kagi.com and their fax number is +1
510 652-6589. You can either Copy the data from Register and paste into the body of an email message or you can Save the data to a file and you can attach that file to an email message. There is no need to compress the data file, it's already pretty small. If you have a fax modem, just Print the data to the Kagi fax number.
Payments sent via email are processed within 3 to 4 days. You will receive an email acknowledgment when it is processed. Payments sent via fax take up to 10 days and
if you provide a correct internet email address you will receive an email acknowledgment.
If you are paying with Cash or USD Check you should print the data using the Register application and send it to the address shown on the form, which is:
1442-A Walnut Street PMB #392-5I
Berkeley, California 94709-1405
You can pay with a wide variety of cash from different countries but at present if you pay via check, it must be a check drawn in US Dollars. Kagi cannot accept checks in
other currencies, the conversion rate for non-USD checks is around USD 15 per check and that is just not practical.
If you have a purchasing department, you can enter all the data into the Register program and then select Invoice as your payment method. Print three copies of the form and send it to your accounts payable people. You might want to highlight the line that mentions that they must include a copy of the form with their payment. Kagi can not invoice your company, you need to a
ct on my behalf and generate the invoice and handle all the paperwork on your end.
Please do not fax or email payment forms that indicate Cash, Check or Invoice as the payment method. As far as we know, there is still no technology to transfer physical objects via fax or email and without the payment, the form cannot be processed.
Payments sent via postal mail take time to reach Kagi and then up to 10 days for processing. Again, if you include a correct email address, you will hear from
Kagi when the form is processed.
2) Pay via Kagi Online
See under 1) for a description of what Kagi payment service is.
Kagi has a web page where you can pay via Credit Card. Point your web browser at <http://order.kagi.com/?5i> Fill in the form and follow the instructions.
3) Pay via Waves in Motion
This Troi plug-in is also distributed by Waves in Motion. Waves in Motion has a web page where you can pay via Credit Card and directly download a full working version after payment. Poi
nt your web browser at <http://www.wmotion.com/Products.html>. Fill in the form and follow the instructions.
4) Pay Troi Automatisering directly
Please use option 1 or 2 (Pay Kagi) if you live outside the Netherlands.
But if you live in The Netherlands you can pay as follows:
This is the pricing:
Grabber
plug-in
1 or more single user licenses (per user): fl. 158 excl.VAT
Site license:
fl. 800 excl.VAT
World-wide license: fl.1200 excl.VAT
Developer distribution license: fl. 400 excl.VAT
Please pay the appropriate amount to:
Bank Name: Postbank NV, Amsterdam
Postgiro Account number: 72.29.209
Troi Automatisering
Vuurlaan 18
2408 NB Alphen a/d Rijn
The Netherlands
To indicate for which software you are paying, add a remark like this:
Troi Grabber Plug-in Macintosh x number of copies
and/or
Troi Grabber Plug-in Windows
x number of copies
Please e-mail your payment details as well.
Protection and Unlocking the plug-in
Troi Grabber Plug-in has a protection scheme. After you pay Troi Automatisering will tell you how to indicate to Troi Grabber Plug-in that you have paid the license fee.
If you do not have an e-mail address, please enter your complete postal address and remember, we do not know what country you live in so please enter that into the postal address also.
After you've supplied the paymen
t data the following is changed:
- the
unregistered
warning is replaced by your name.
- the startup delay (which is longer after 30 days of use) and the OK button will be removed.
If you find a bug, please report this by e-mail: peter@troi.nl. If you have any comments or other functions that you think need to be added, please notify us! We have a lot of ideas for this plug-in, so be sure to check
our web site for new versions.
And please pay for software you keep using, so that the wish list gets reality.
Versions
1.2 (04-11-99)
- Added Compatibility for FileMaker Pro 5
1.1 (30-06-99)
- Final release
- Rotate and Cropping functions (Mac Only)
1.0.1b1 (31-03-99)
- First Windows version
- fixed a bug with the centering of the image when switching from PAL to NTSC (or reverse).
- Improved User Guide on page 11-12
1.0 (09-11-98) First release
- Changing screen resolution is ha
ndled properly.
- Grab-DoSettingsDialognow returns a proper error code when there is no preview running.
- Grab-Stop returns a error code 0.
- sample scripts now checks for more error codes.
- added Trade Show sample.
Thanks for supporting our software,
Peter Baanen
Grabber Plug-in Read MeI
To MenuJ
PrintK
1998-1999 Troi Automatisering
Image grabbing (in status bar!)B
To MenuE
PrintF
FM Plug-in Bug warning
Warning:
There is a problem in Filemaker 4.0v1. Please make sure that all plug-ins are enabled in the preferences. (Under Edit/ Preferences/ Application/ Plug-ins). Remove plug-ins you don't use from the "FileMaker Extensions" (Mac) folder or
SYSTEM
directory (Win).
Image grabbing 1024x768B
To Menum
Image Grabbingp
container holding grabbed imager
Grab imageu
Now Grab this!v
Preview In the status bar!{
Image grabbing (Win)B
error codeo
To Menus(container holding grabbed image (scaled)t
change video settingsu
2 - start previewy
save settingsz
restore settings{
4- stop
I1in this rectangle the video preview wil be shown.
J*1- connect a video input to your computer.
After clicking this button you should get the live video image preview on the left. If not, you may need to change the video settings (press the button below).
3 - grab image
M]Clicking this button will create a new record and get the image in the container field below.
N This will stop the preview mode.
P.Video Image Grabbing
Inside FileMaker Pro 4.0!
Rotate/CropB
error codeo
To Menup
Video Image Grabbingt
change video sourceu
2 - aquire image{
3- stop
I2in this rectangle the grabbed image will be shown.
JAvUnder Windows the preview is shown in a separate window
1- connect a video input with a Twain Driver to your computer.
After clicking this button you should get the live video image preview in a separate window. There you can click on the
Aquire image
button. The image will then be pasted into the container field.
N:This will shutdown the driver and
free all related memory.
P.With this button you can set the
video source.
----- General ------
&Check for Presence of Grabber plug-in
----- IMAGE GRABBING ------
Start Preview
Start Preview Mac
Acquire Image Win
&New record and Grab Image To Clipboard
Stop Grabbing
Do Video Settings Dialog
Get Grabber Settings
Set Grabber Settings
Loop: GrabTo Clipboard
Start Preview in statusarea
Show Error Message
----- Other variants ------
Start Preview 320x240
Start Preview 1 on 1 tilted
----- Misc ------
$ Open file
Set all globals
To Menu
To Image Grabbing
To Student Registration Sample
To Trade show Sample
Quit button dialog
DelayTicks
4*----- Rotate and Crop (Mac OS only) ------
To Rotation and Cropping
Start Preview RotCrop
Start Preview Mac RotCrop
Start Preview Mac RotCrop PAL
error codeo
To Menup
Rotate and Croppings(container holding grabbed image (scaled)t
change video settingsu
2 - start previewy
save z
restore{
4- stop
I2in this rectangle the video preview will be shown.
J*1- connect a video input to your computer.
After clicking this button you should get the live video image preview on the left. If not, you may need to change the video settings (see below).
3 - grab 2 images
M]Clicking this button will create a new record and get 2 images in the container fields below.
N This will stop the preview mode.
Image Detail
3b - grab 1 image + Crop
Clicking this button will create a new record and get 1 image in the container field below.The this image is cropped in the right field.
Toggle Rectangle
clear
Settings
aA?Use Alternate Bounds
(use this option if you see a white band)
Helvetica
Geneva
Arial
Times New Roman
Monaco
Courier
Times
Futura
Courier New
Palatino
Minion Web
MS Sans Serif
Set rotation 90 degrees
Set rotation 0 degrees
Set rotation -90 degrees
Show Crop Rectangle
F9New record + store 2 identical images: 1 Full + 1 Cropped
H)New record and Grab 2 Images To Clipboard
CropClipboard
Toggle Crop Rectangle
Delete Grabber Settings
----- Documentation etc ------
To Function Overview
T WWW: Goto web site: www.troi.com
WWW: Order via web site
BeepBeep
Toggle Status Area
----- Troi Testing only ------
^ Start Preview in statusarea Copy
Start Preview Mac Portrait Copy
Start Preview Mac + Gworld
d"Start Preview Mac Portrait PAL ALT
Start Preview
To Menu
) =1
----- IMAGE GRABBING ------
A&Check for Presence of Grabber plug-in
A4Important: ALWAYS check if the plug-in is available!B)Check if this is FileMaker 4.0 or higher.CQ
1)) < 4
Canceld
This file requires FileMaker 4.0 or higherE/Check if the Troi Grabber Plug-in is available.
A/Start up the preview of the image to be grabbedB,
) = 1
2) = "$$"
Set all globals
|("Troi-Set Default Separator"
"|")
Troi-Set Default Separator
A Open file
Check for Read-Only statusB,
) = 0
|("Grab-Version"
"")
15 ) <> "Grabber Plug-in"
Grab-Version
Grabber Plug-in
) = 1
Canceld
The Grabber Plug-in not found.
Please put The Grabber Plug-in into the Extensions folder inside the FileMaker folder. Also enable all the plug-ins under the application preferences.
Canceld
The Grabber Plug-in not found. Please put the The Grabber Plug-in into the SYSTEM directory inside the FileMaker directory.
Also enable all the plug-ins under the application preferences.
,A WWW: Goto web site: www.troi.com
Cancel
Do you want to connect to Troi's web site?B+
) = 1
http://www.troi.com/
Button 2
Quit button dialog
|("Troi-Version"
"")
15 ) = "Troi FM Plug-in"
Troi-Version
Troi FM Plug-in
<> 0
Cancel
This file is locked. Please unlock this and other sample files: Select the files and click on the files with the right mouse button and choose Properties. In Properties, uncheck the option for Read-only. Then reopen the file.G,
) = 2
= "Grabber Plug-in 1.0.1b1"
Grabber Plug-in 1.0.1b1
Cancel
Please note that this is a beta version.
Be careful, save other work first and test this software using a test database. Use at your own risk!
Cancel
Also note that the commands for the Windows version are slightly different from the Mac OS version. The Mac version is based on QuickTime.
Cancel
The Windows version is based on TWAIN drivers. This has proved quite difficult, so the Windows plug-in may not work in your situation.
Be sure to read the README file!L.
) >= 870
Cancel
On some machines the internal grabber will not work at this resolution (1152x870). You may have to switch to a lower resolution.
----- General ------
----- Documentation etc ------
DelayTicks
OKt);
PI( OSErr )
SetBev
CancelnContentInfo (ControlHandl
inButton,
ControlButWith "DelayTicks" function you can pause a script. You can specify the time in Ticks (1/60 of a second).
This way you can specify very precise or short waits like in the next step, which waits 30 Ticks = 1/2 sec.BF
|("TrDl-DelayTicks"
"30")
TrDl-DelayTicks
WWW: Order via web site
http://order.kagi.com/?5i-bin/register1.cgi?5iP
Button 2
----- Misc ------
|("Troi-DoDialog"
"Do you want to quit the FileMaker application as well?|OK|No||Cancel")
Troi-DoDialog
DDo you want to quit the FileMaker application as well?|OK|No||Cancel|C'
BeepBeep
lA&New record and Grab Image To Clipboard
|("Grab-ImageToClip"
Grab-ImageToClip
<> 0
Cancel~
An error occurred. Make sure you start the preview before grabbing an image.
Stop Grabbing
|("Grab-Stop"
Grab-Stop
Do Video Settings Dialog
A/Hidden Script: Restores to globals to defaults,B
Loop: GrabTo Clipboard
<> 0
Get Grabber Settings
|("Grab-GetSettings"
Grab-GetSettings
Set Grabber Settings
I <> ""
|("Grab-SetSettings"
Grab-SetSettings
Start Preview in statusarea
|("Grab-DoSettingsDialog"
"-video")
Grab-DoSettingsDialog
-video|BF
= 0
) = 1
Noncel
Do you want to save these settings as default settings?D+
) = 1
= "$$-2042"
$$-2042
Cancel
Start the preview first before changing the settings.G{
Cancel
An error has occured.
Toggle Status Area
To Image Grabbing
) = 1
To Student Registration Sample
To Function Overview
{A Start Preview in statusarea Copy
|("Grab-Initialise"
Grab-Initialise
|("Grab-StartPreview"
"2|200|60|45")
Grab-StartPreview
2|200|60|45|
To Trade show Sample
Start Preview 320x240
Cancel
fubuZR
CThis is an experimental feature. Please save all your work first.
Are you sure you want to do this?B+
) = 2
|("Grab-Initialise"
Grab-Initialise
|("Grab-StartPreview"
"2|150|60|45")
Grab-StartPreview
2|150|60|45|E
|("Grab-Stop"
Grab-Stop
Start Preview 1 on 1 tilted
A/Start up the preview of the image to be grabbedBB
|("Grab-Initialise"
Grab-Initialise
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|" &
L & "|" &
Grab-StartPreview
10|100|
) < 768
CancelT
Your screen is to small. The preview image will not fit. Do you want to continue?C+
) = 2
D/Start up the preview of the image to be grabbedEB
|("Grab-Initialise"
Grab-Initialise
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|" &
L & "|" &
Grab-StartPreview
10|100|
|J5An Error occurred. put the errorcode into the global.K
K = "$$-9405"
$$-9405
Cancel
No video component was found on this computer. Check if your video software is properly installed.N
Cancel
An error occured while initializing the video input.
----- Other variants ------
Start Preview Mac
A/Start up the preview of the image to be grabbedBB
|("Grab-Initialise"
Grab-Initialise
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|" &
L /2 & "|" &
M / 2)
Grab-StartPreview
10|100|
|G5An Error occurred. put the errorcode into the global.H
G5An Error occurred. put the errorcode into the global.H
K = "$$-9405"
$$-9405
Cancel
No video component was found on this computer. Check if your video software is properly installed.K
Cancel
An error occured while initializing the video input.
Acquire Image Win
A/Start up the preview of the image to be grabbedB
Cancelut
Please make sure the TWAIN device is present and is switched on.C+
) =2
|("Grab-Initialise"
Grab-Initialise
2) <> "$$"
|("Grab-AcquireToClip"
Grab-AcquireToClip
2) <> "$$"
= "$$-1"
Start Preview RotCrop
A/Start up the preview of the image to be grabbedB,
) = 1
2) = "$$"
A*----- Rotate and Crop (Mac OS only) ------
Start Preview Mac RotCrop
A/Start up the preview of the image to be grabbed
flag )
StDev ( field
CancelStDevP ( field... )5
Substi
ute ( text ; search
string ; replThe dialog was cancelled.
When a user cancels $$-1 will be returned.
Show Crop Rectangle
Shows a portrait rectangleBh
|("Grab-DisplayCropRect"
"100|50|240|320")
Grab-DisplayCropRect
100|50|240|320|C
"shown"
shown
To Rotation and Cropping
) = 1
Cancel
This functionality is not (yet) available on Windows.
Set rotation 90 degrees
Set to 90 degrees rotationBH
|("Grab-SetRotation"
"90")
Grab-SetRotation
A)New record and Grab 2 Images To Clipboard
|("Grab-Initialise"
"useGWorld" &
Q = "Y"
" useAltBounds"
""))
Grab-Initialise
useGWorld
useAltBounds
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|" &
M / 2 & "|" &
L /2)
Grab-StartPreview
10|100|
|G5An Error occurred. put the errorcode into the global.H
A9New record + store 2 identical images: 1 Full + 1 Cropped
AC# 1- get the full size image from the grabber into the clipboard...BD
|("Grab-ImageToClip"
Grab-ImageToClip
<> 0
Cancel~
An error occurred. Make sure you start the preview before grabbing an image.E*... paste it into the 1st container field.F)# 2- crop the image on the clipboard....G0... then paste it into the 2nd container field.H$Leave the record to save it to disk:
CropClipboard
AC# 1- get the full size image from the grabber into the clipboard...BD
|("Grab-ImageToClip"
Grab-ImageToClip
<> 0
Cancel~
An error occurred. Make sure you start the preview before grabbing an image.E*... paste it into the 1st container field.F-# 2- get a cropped image on the clipboard....GR
|("Grab-ImageToClip"
"cropped")
Grab-ImageToClip
cropped|H*... paste it into the 2nd container field.
Toggle Crop Rectangle
A+Toggles a portrait rectangle on the previewB,
P <> "shown"
shown
C:It is not shown yet. Tell the plug-in to start showing it.Dh
|("Grab-DisplayCropRect"
"100|50|240|320")
Grab-DisplayCropRect
100|50|240|320|E
"shown"
shownF9It is already shown. Tell the plug-in to stop showing it.GL
|("Grab-DisplayCropRect"
Grab-DisplayCropRect
Delete Grabber Settings
Start Preview Mac RotCrop PAL
A5Crop an image on the clipboard to the requested size.BZ
|("Grab-CropClip"
"100|50|240|320")
Grab-CropClip
100|50|240|320|C(
<> 0
= "$$-4207"
$$-4207
Cancel~
An error occurred. There was no picture in the clipboard.F
Cancel~
An error occurred. There was not enough memory or you have specified incorrect parameters in this script.
Start Preview Mac Portrait Copy
A/Start up the preview of the image to be grabbedBT
|("Grab-Initialise"
"useGWorld")
Grab-Initialise
useGWorld|C=
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|" &
M / 2 & "|" &
L /2)
Grab-StartPreview
10|100|
A/Start up the preview of the image to be grabbedBT
|("Grab-Initialise"
"useGWorld")
Grab-Initialise
useGWorld|C=
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|288|384")
Grab-StartPreview
10|100|288|384|G5An Error occurred. put the errorcode into the global.H
Start Preview Mac + Gworld
A/Start up the preview of the image to be grabbedBT
|("Grab-Initialise"
"useGWorld")
Grab-Initialise
useGWorld|C=
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|" &
L /2 & "|" &
M / 2)
Grab-StartPreview
10|100|
|G5An Error occurred. put the errorcode into the global.H
A"Start Preview Mac Portrait PAL ALT
H5An Error occurred. put the errorcode into the global.I
----- Troi Testing only ------
Set rotation 0 degrees
Set to 0 degrees rotationBF
|("Grab-SetRotation"
"0")
Grab-SetRotation
Set rotation -90 degrees
Set to -90 degrees rotationBJ
|("Grab-SetRotation"
"-90")
Grab-SetRotation
Show Error Message
Shows an error message.B<
2) = "$$"
= "$$-9405"
$$-9405
A/Start up the preview of the image to be grabbedBn
|("Grab-Initialise"
"useGWorld useAltBounds")
Grab-Initialise
useGWorld useAltBounds|C=
2) <> "$$"
"|"
1 ) - 1)
"|"
1 ) + 1)
|("Grab-StartPreview"
"10|100|288|384")
Grab-StartPreview
10|100|288|384|G5An Error occurred. put the errorcode into the global.H
Cancel
No video component was found on this computer. Check if your video software is properly installed.E,
= "$$-108"
$$-108
Cancel
FileMaker Pro has not enough memory to do this. Please quit FileMaker and increase the allocated memory.G
Cancel
An error occured while initializing the video input.
(See Troi OSErrrs database for more information on the error code).
ZDFFw
alisA
alisA
NAMEA
NAMEA
k{k|w
[=g\gYg\.T
g\c[_]c\ozc\g\[]g\c[o{c[g\[\g\24
OYBw*
_ZkZ[ZkZ_ZkZOZkZ[ZkZ_Zw
k]k]{
g\g=5
5sF6g]F
o|g]k}
k]k]s
o|g]{
k]k]w
Nv_:5
g=g<_;w
o\o}5
k=JW1
o\g{1
g=k]5
NvkZ2
s}g]k\
g=g<w
g}k=o
o^k{k}
g]k=k
g}k]o}
[<.Y2Y
~2~2A)
A ~1~2~1~
~t~2~2~
U~1~2Yl
~2~1~2~1~
&A ~1~
~1~1~
~1~2~
~2~1~
~1~2~2
~2~1~
~2~1~2~
~2~2~
~2~2~
~2~2~
~2~1~
~1~2%
U~1~2A
~2~1~
~2~2~
~1~2~
~2~1~
~1~2~
~2~1~
~1~1~2~
~2~1~
~2~1~
~1~2Y
~2~2~
~2~1~
~2~1~
A ~1~
~1~2~
~2~1~
~1~2~
~1~2~
~2~1~1~2~
A ~2~
~1~2~
~1~2~
~2~1~
~2~1~
~2~1~
~1~2~
A ~2~
~2~1~
~1~2~
~1~2~
~1~2~
~1~2~
~1~1~
~1~2~
~2~1~
~1~2~
~2~1~
~1~2~
A(~1~
~1~2~
~1~2~1~
~2~1~
~2~1~
Uk~1~2~
~1~2~
A ~1~2~
~1~2~
~2~1~
~2~1~
~2~1~
~1~1~
~1~1~
~2~1~
~1~2~1~
~1~2~
~2~1~
l!m~1~
~1~2~
A ~1~2~
~1~1~2~
~2~1E
A ~2~1~
~2~1~
~1~2~
~1~2~
~1~2~
~2~1~
~1~2~
~2~2~
~1~2~1~
~2~1e
~1~2~
~2~2~
TB1FQb
.F1BQ
~2~1~
~2~1~
~2~1~
~2~1Y
~2~1~
+~1~2~
~1~2~
~1~2~
~2~2~
~1~1~
~1~2!m
~1~2~
~2~1~
~1~2~
M~1~2~
~2~1~
~2~1!m
,~1~2~
~1~2~
@A ~1~
~1~2~
~1~2~
~1~2~
{~2~1~
~1~2~
~1~2~
~2~19
~2~1~
+~2~1~
~2~1~t
~2~1~
~1~2~
~2~1~
~2~1e
A ~1~
~1~1~
~2!m[
~2~2~
K-m~2~
TA ~1~
~2~1~
~1~2~
~1~2~
~2~1~
~2~1~
q~2~1~
+!m~1~
M~1~2~
~1~2~
~1~2a
~2~1~2~
~2~1~
~2~1~
~1~2~
~2~1~1~2~
~1~2~
~1~2~
~2~1~
~1~2~
~1~2~
~2~1~
~2~1~2~
~2~1~
~2~1~
~1~2~
~1~2~
~1~1~
~1~1~
~1~2~
~2~1~
~2~1~
~1~2~
~2~1~
~2~1~
~2~1~
~2~1~2~
~1~2~
~t~2~
~2~1~
~2~1~
~1~2~
~2~1~
~2~1~
~2~1~
~2~1~
~2~1~
~1~2~1~
~2~1%
~1~2~
~2~1~2~
~1~2~
~2~1~2~
~1~2~1~
~1~2~
~2~1~
~1~1a
~1~2~
~2~1~
!A ~1~
~1~2~
~2~1~
~1~2~
~2~1~
~1~2~
~1~2~1~
~1~2~
~2~1~
~1~2~
~2~1~
~2~1%
~2~1~
~2~1~
~2~1~
A ~2~1~
~1~2~
~2~1~
~2~1~
~1~2~
~2~1~
~2~2~
~1~1~
~2~2~
~2~1~2~
A ~1~
~1~2~
O~t~1~2~
~1~2~
~2~1~
~1~1~
~2~1~
~1~2~
~2~1~
~1~2~1~
.A ~1~
~2~1~
L~t~1~2~
~1~2~
~2~1~
~2~1~
~2~1~
~1~2~
~1~2~
~2~1~
~1~2~
~1~1~
~1~2~
~2~2~
YlA A)~
,!l~2~
+*~2~
~1~2~
~2~1~
~2~1~
~1~2~
~2~1~
~2~1~
~1~2~
~1~2~
~2~1~
~1~1~
~2~1~
~2~1~
~2~1~
~2~1~
~1~2~
(A ~1~
L!m~1~
+!m~2~
(A ~1~1~
~1~2~
~1~2~
A ~1~
~1~2~
~2~1~
+>!mm
~1~2A
!m~1~
~1~2~
~2~1~
~1A ,
+!m~1~
+'~2~
~2~1~
~1~2~
~2~2~
L!m~1~
~1~2~
+~1~2~
+?~1~2~
~2~1~
~1~2m
,~2~1~
~2~1~
A ~1~
~2~1~
~2~1~
~1~1~
~1~2~
~1~2~
~1YlA ,
hA ~1~
+~2~1~
~2~1~
~2~1~
~2~1~
+C~2~
~1~2-m
~2~1A
~2~1~
~1~1~
~1A ,
+!m~2~
+!m~1~
~2~1~
Yl~1~
+!m~2~
~1~2~
~2~2~1~2
YlA ,
~1~2m
~2~2~
~1~2~
~2~1~
+$~2~1~
L~2~1~
~2~1~2~2A
~2~1~
~1~2~
K!m~2~1~
~1~2~
~2~1~
~1~2~1~
cA ~1~
~1~2A
~2~1~
~2~1~
~1~2~
~1~1~
~2~1~
A ~1~
~2~1A
~2~1~
~2~1~
~2~2~
~1~2~1~
~1~2~
~1~2~
~1~2~
~2~1~2~
~1~1~
~1~2~
~2~1~
~2~2~
~1~2~
~1~2~
A ~1~
~2~2~
~1~2~
~1~2~1~2~
~2~1~
~1~2~
~2~1~
~2~2~1~
~1~2~
~1~2~
YkA ,
~1~2~
~1~2~
~2~1~
~2~1~
~1~2~
~2~1~
~2~1~2~
~1~1~
~2~1~2~1~
~1~2~
~2~1~2~
~1~1~
~2~1~
~2~1~
~2~1~
SuWu"
~2~1~
~1~2~
~2~1~
~1~2~
~1~2~1~
~1~2~
~1~2~
WvSu&
~1~2~
~2~1~2~
~1~2~
~2~1~2~
~1~2~
~1~2~
~1~2~
~2~2~1~
~2~1~
~2~1~
~1~2~
~2~1~
C2C27
}Yl~1~
~1~2~
~2~1~
~1~2~
~2~1~2~1~
~2~1~
~1~2~
*WvSu&
~1~2~1~
-SuC2&
~1~2~
~1~2~
~2~1~
~2~1~
~2~1E
~1~2~
K!m~1~
~2~2~
~1~2~
~1!mm
WvSu&
~2~2~
+!m~2~1~
,!m~2~
+-m~2~
~2~1~
~t~2~
~1~2~
~1~2!m
~2~1~
+!m~1~
~2~1~2~
Yl~1%
~2~1~2~
~2~1~
+~2~1
~2~1~
~2~1!m
~2~2~
~2~1~
A ~1~
Uk~2~
~2~1~
~1~2~
~2~2~1~
~2~1~
~1~2~1~
~1~1~2~1E
~2~1~2~
K-n~1~
~1~2~
7~t~1~
~1~2~
~2~1A
~1~2~
~2~1~1~2
~1~2~
~1~1~
A ~2~
oA ~1~
~2~1~
~1~2~1~
~2~1~
~2~1~2~
o~1~2~
~1~2~
~2~1~
~1~2~
~1~2!m
~1~2~
~1~2~
~2~1~
~1~2~
~1~2~
~1~1~2~
~1~2~
~1~1~
~1~2~
~1~2~
~1~2~
~2~2~
~2~1~
~2~1~
~2~2~1E
A ~1~
~2~1~
~1~2~
~1~2~
~2~1~
~2~1~
~2~1~
~2~1~1~
5~S~2~
C1Suc
~2~2~
~2~2~
~2~1~
A ~1~
qUl~1~
~1~2~
~2~1~
~1~2~
~2~1~
~1~2~
~2~1~
~2~2~
~2~1~2~2~
~2~2~
~2~1~
~2~1~
~2~1~
~2~1~
~2~1~
~1~2~
~1~2~1~
~2~1~2~1~
qA ~2~
~2~1~
~2~1~
Ul~2~
~2~1~
~1~2~
~1~2~
~2~1~2~1~
~1~2~
~1~2~
~2~1~
~2~1~
1~2~1~
~2~1~
~t~1~
C2OTc
~1~2~
~1~2~
oA ~1~2~
~2~1~2~
~1~2~
~1~1~
~2~1~
~1~2~
~2~1~2~
~2~1~
o{JR-k
~2~1~
A A a
~1~1~
~1~2~
~2~1~
~1~2~
2~t~2~
~1~1~
A An%
lUl~1~
~1~2~
~1~2~
~1~1~
~1~1~
~2~2~
Ul~2~
~2~1~2~
~1~2~
~2~1~
~2~1~
A A)~
~2~1~
~1~1~
~2~1~
~2~2~
"A A ~1~2~
~2~1~
~2~1~2~
~1~2~
~1~2~
~1~2~
~2~1~
~1~1~
~1~2~
~2~1~
~1~2%
~1~1~2~
~1~2~
A Ul~1~
~1~2~
~1~2~
~1~2~
~1~2~
~2~1~
~2~1~
~1~2~
~1~2A
~2~1~
A A)~
~1~2~
~2~1~
~2~1~
~1~2~
~2~1~
A A ~1~
~2~1~
~1~2~
~2A ~
A Yl~1~2~
~2~2~
~2~1~
~2~1~1~
~2~1~
~1~2~
~2~1~2~
~2~1~
~2~1~
~1~1~
~2~1~
~2~1~
~1~1~
~1~2~
~1~2~
~2~2,
~1~2~
~2~1~
A)~1~
~1~2~
~1A A)~
A ~2~
yA ~1~
~t~1~
Yk~2~
A ~1~
~1~2~
c~2~1~
A ~2~
~2~1~2~
A ~1~
~2~1A
~1~2~
Yl~1~
A ~1~
~2~1A
WYl~1~
~2~S~
A ~2~
A ~1~
A ~1~
A ~1~
LA ~1~
DA ~1~
3A ~2~1~
Yl~1~
HRPTH
FPTHAHKES:Projecten:Troi FM Plug-In:GRAB:Troi-Grabber-Plug-in1.0a1:StudReg.fp3
MSPCA
NAMEA
StudReg.fp3
RPTHA
StudReg.fp3
StudReg.fp3
FMP3FMP3
Troi-Grabber-Plug-in1.0a1
HKES:Projecten:Troi FM Plug-In:GRAB:Troi-Grabber-Plug-in1.0a1:StudReg.fp3
Ethernet zone
McGee
peter
PRPTH
FPTHAPKES:Projecten:Troi FM Plug-In:GRAB:Troi-Grabber-Plug-in1.0a1:samples:StudReg.fp3
(.txt)